HC rotary solid-liquid separator is a special rake tooth made of ABS engineering plastic, nylon 66, nylon 1010 or stainless steel. It is assembled on the rake tooth in a certain order to form a closed rake tooth chain. Its lower part is installed in the inlet channel. Driven by the transmission system, the whole rake tooth chain (water facing working face) moves from bottom to top and carries solid debris to separate from the liquid, The liquid flows through the grid gap of the rake teeth, and the whole working process is continuous.Send Email Details
Due to the reasonable design of the rake tooth structure, when the debris carried by the rake tooth chain reaches the upper end and moves reversely, there is a relative self-cleaning movement between the two rows of rake teeth connected in front and back, which promotes the debris to fall off by gravity; At the same time, a pair of nylon brushes opposite to the moving direction of the rake tooth chain are set at the rear of the equipment to ensure that each row of rake teeth can be completely brushed when they move to this position.
1. Compact and integrated structure and high degree of automation (the operation of the equipment can be controlled by PLC microcomputer control system).Send Email Details
2. Low energy consumption, low noise and high separation efficiency.
3. Continuous decontamination without blockage and clean slag discharge.
4. Good corrosion resistance (all moving parts are stainless steel and nylon).
5. The transmission system is equipped with double protection of mechanical overload protection and overload limiter
The biggest advantages of the equipment are high degree of automation, high separation efficiency, low power consumption, no noise and good corrosion resistance. It can ensure continuous and stable operation when unattended. It is equipped with overload safety protection device, which will automatically shut down in case of equipment failure, so as to avoid overload operation of the equipment. The equipment can arbitrarily adjust the equipment operation interval according to the needs of users to realize periodic operation; It can be automatically controlled according to the liquid level difference before and after the grid; It also has manual control function to facilitate maintenance. Users can choose according to different work needs.
Due to the reasonable structural design of the equipment, when the equipment works, it has strong self purification ability and will not be blocked, so the daily maintenance workload is very small.Continuous automatic sewage cleaning equipment Removal of sundries in water Primary separation sundriesSend Email Details
The transmission mechanism of HGS grid trash remover is equipped with mechanical overload protection device. When the intercepted dirt exceeds the rated load of the rake bucket, the overload protection device will instantly cut off the power supply and give an alarm. At the same time, the whole system of the trash remover adopts rope breaking, rope loosening, anti tipping and other devices, so the operation is safe and reliable. The electrical control can set the startup times and single working time per day according to the user's requirements, or cooperate with the front and rear liquid level difference meters of the grid for automatic control.Send Email Details
Hyd mobile grab grid trash remover is a hanging and grab structure, which is composed of guide rail, trash cleaning trolley, grab unit, trash rack and electrical control system;
The roller of the cleaning trolley moves in the guide rail, which is supported by several gantry frames;
The cleaning trolley is combined with the grab lifting device and the hydraulic claw closing actuator to work with the operation of the cleaning trolley;
The grab unit comprises the grab itself, a steel wire rope lifting device and a hydraulic claw closing device.Grab decontamination equipment Interception of floating objects and decontamination Trash interceptorSend Email Details
1.High removal rate, which can effectively remove hair and other fibrous substances;
2.The backwashing water will completely remove the dirt trapped on the screen plate and will not fall into the filtered water to avoid secondary pollution;
3.The mesh plate adopts non-metallic injection molding parts, which are wear-resistant and corrosion-resistant;
4.Underwater transmission parts are not set, so there is no need for maintenance, which is more convenient for overhaul and maintenance;
5. Easily worn parts are fully standardized, easy to replace and easy to operate.
6. Stable operation, light vibration and low noise.Solid liquid separation equipment Industrial sewage pretreatment Dirt removal and slag collection equipmentSend Email Details