-
Hot
Rotary Solid Liquid Separator
HC rotary solid-liquid separator is a special rake tooth made of ABS engineering plastic, nylon 66, nylon 1010 or stainless steel. It is assembled on the rake tooth in a certain order to form a closed rake tooth chain. Its lower part is installed in the inlet channel. Driven by the transmission system, the whole rake tooth chain (water facing working face) moves from bottom to top and carries solid debris to separate from the liquid, The liquid flows through the grid gap of the rake teeth, and the whole working process is continuous. Due to the reasonable design of the rake tooth structure, when the debris carried by the rake tooth chain reaches the upper end and moves reversely, there is a relative self-cleaning movement between the two rows of rake teeth connected in front and back, which promotes the debris to fall off by gravity; At the same time, a pair of nylon brushes opposite to the moving direction of the rake tooth chain are set at the rear of the equipment to ensure that each row of rake teeth can be completely brushed when they move to this position.
Send Email Details -
Screen Fine Grid Decontamination Machine
1.High removal rate, which can effectively remove hair and other fibrous substances; 2.The backwashing water will completely remove the dirt trapped on the screen plate and will not fall into the filtered water to avoid secondary pollution; 3.The mesh plate adopts non-metallic injection molding parts, which are wear-resistant and corrosion-resistant; 4.Underwater transmission parts are not set, so there is no need for maintenance, which is more convenient for overhaul and maintenance; 5. Easily worn parts are fully standardized, easy to replace and easy to operate. 6. Stable operation, light vibration and low noise.
Solid liquid separation equipment Industrial sewage pretreatment Dirt removal and slag collection equipmentSend Email Details
