Integrated Water Purifier

1. In addition to the management of the primary pump house and dosing system, the water purification device itself has met the requirements of automatic operation from a series of operation procedures such as reaction, flocculation, sedimentation, sludge collection, water distribution, filtration, backwashing and sewage discharge. As long as the personnel on duty regularly monitor and measure the water quality, there is no need to operate and manage the water purification device. 2. The high concentration flocculation layer can make the magazine particles in the raw water get full collision contact between them and increase the probability of adsorption. Therefore, it can adapt to the water temperature and turbidity of various raw water, and the removal rate of magazine particles is high. Under certain service conditions, it also has the function of algae removal. 3. The quick sludge concentration chamber and adjustable automatic sludge discharge system can ensure the timely elimination of excess sludge impurities, so as to ensure a stable particle removal rate. 4. Efficient flocculation and sedimentation effect keep the quality of precipitated effluent in good condition. 5. The novel and original water collection system and the lowest water collection head make the water collection more uniform and effective, which not only improves the volume utilization coefficient, but also accumulates considerable power saving effect because of its very small water collection head. 6. The automation of the water purification system not only ensures the high-efficiency filtration of the water purification system (when the turbidity of the raw water is less than 3000mg / L, the turbidity of the filtered water can be maintained below 3mg / L), but also can automatically backwash. There is no need to set another backwash pump or air compressor and other electrical equipment, which can save a lot of capital investment and daily operation, maintenance and maintenance costs. 7.The water consumption rate is low, about ＜ 5%, which plays a positive role in saving effective water resources. 8. The floor area is small. Compared with general water purification structures, it can save more than 50% of the floor area, and the height is about 4.10m. It can be placed indoors and outdoors. 9. It is convenient for expansion, transformation, reuse, relocation or relocation.