-
Hot
Integrated Water Purifier
1. In addition to the management of the primary pump house and dosing system, the water purification device itself has met the requirements of automatic operation from a series of operation procedures such as reaction, flocculation, sedimentation, sludge collection, water distribution, filtration, backwashing and sewage discharge. As long as the personnel on duty regularly monitor and measure the water quality, there is no need to operate and manage the water purification device. 2. The high concentration flocculation layer can make the magazine particles in the raw water get full collision contact between them and increase the probability of adsorption. Therefore, it can adapt to the water temperature and turbidity of various raw water, and the removal rate of magazine particles is high. Under certain service conditions, it also has the function of algae removal. 3. The quick sludge concentration chamber and adjustable automatic sludge discharge system can ensure the timely elimination of excess sludge impurities, so as to ensure a stable particle removal rate. 4. Efficient flocculation and sedimentation effect keep the quality of precipitated effluent in good condition. 5. The novel and original water collection system and the lowest water collection head make the water collection more uniform and effective, which not only improves the volume utilization coefficient, but also accumulates considerable power saving effect because of its very small water collection head. 6. The automation of the water purification system not only ensures the high-efficiency filtration of the water purification system (when the turbidity of the raw water is less than 3000mg / L, the turbidity of the filtered water can be maintained below 3mg / L), but also can automatically backwash. There is no need to set another backwash pump or air compressor and other electrical equipment, which can save a lot of capital investment and daily operation, maintenance and maintenance costs. 7.The water consumption rate is low, about ＜ 5%, which plays a positive role in saving effective water resources. 8. The floor area is small. Compared with general water purification structures, it can save more than 50% of the floor area, and the height is about 4.10m. It can be placed indoors and outdoors. 9. It is convenient for expansion, transformation, reuse, relocation or relocation.
Send Email Details -
Hot
Electrodialyzer
The basic principle of electrodialyzer desalination is to use the selective permeability of ion exchange membrane. The cation exchange membrane only allows cations to pass through and blocks anions to pass through. The anion exchange membrane only allows anionic energy ions to pass through. Under the action of external DC electric field, water ions migrate directionally. Make most ions in one way of water migrate to another way of ion water.
Ion exchange membrane desalination equipment Seawater desalination equipment Brackish water desalination deviceSend Email Details -
Hot
Ultrafiltration Fiber Forming Equipment
Typical process flow: stock solution - storage tank - booster pump - Filter - hollow ultrafiltration equipment - liquid storage tank - backwashing water tank - backwashing pump Field of use: (1) The pretreatment of reverse osmosis feed water and compact ultrafiltration can provide great protection for reverse osmosis membrane because of its high filtration precision (2) Advanced treatment of large and medium-sized drinking water plants (3) Municipal and industrial wastewater treatment: ultrafiltration can provide better treatment effect than traditional treatment process and realize the reuse of reclaimed water and wastewater (4) Reuse and purification treatment of circulating sewage (5) Recovery of useful substances in sewage (6) High purity water terminal treatment (7) Concentration and separation of fruit juice, protein and enzyme preparation
Ultrafiltration membrane equipment Preparation of pure water in electronic industry Sterile depyrogenated pure water equipmentSend Email Details -
Hot
Countercurrent Regeneration Cation Anion Exchanger
Ion exchange is carried out in electrolyte solution through ion exchange resin, which can remove various anions and anions in water. It is an irreplaceable means in the current process of preparing high-purity water. Ion exchangers are divided into cation exchangers and anion exchangers. When the raw water passes through particle exchange, the cations and anions in the water (HCO plasma) are exchanged with the H + ions of the cation resin and the OH - ions of the anion resin in the exchange column, so as to achieve the purpose of desalination. Different combinations of Yang Yin mixed columns can make the water quality meet higher requirements.
Medical water treatment equipment Petroleum water treatment equipment Coating water treatment equipmentSend Email Details -
Downstream Regeneration Cation Anion Exchanger
The device is used for further purification of natural water after treatment. It is suitable for pure water and ultra pure water equipment in electronic, pharmaceutical, mint, chemical and petroleum industries.
Send Email Details -
Single Chamber Floating Bed Ion Exchanger
Single chamber floating bed cation anion exchanger is a water treatment device for preparing high-purity wastewater. It can be used in power, petroleum, chemical industry, electronics and other departments to desalinate brine. The single chamber floating bed cation anion exchanger produced by the company is a complete set of equipment made by Northeast Electric Power Design Institute by absorbing the advantages of floating bed equipment imported from West Germany. It has the advantages of good effluent quality, low acid-base consumption, less waste liquid discharge, low washing water consumption, high-speed operation, simple operation and easy automation.
Floating bed ion exchanger High purity water treatment device Single chamber floating bed ion exchangerSend Email Details -
Double Chamber Floating Bed Ion Exchanger
Upflow water production: the treated water penetrates the resin layer from bottom to top and boils in two chambers. The resin in the upper and lower chambers of the floating bed forms a boiling layer and a floating layer (compression layer) according to a certain ratio. A water cushion is formed between the boiling layer and the floating layer to strictly separate the two. All ions in the treated water are first exchanged with the resin in the boiling layer, which increases the contact surface and gives full play to the exchange capacity of the resin. Most ions can be removed by the resin exchange in the boiling state, and the remaining ions are refined in the floating layer (compression layer), so as to achieve the best exchange effect and the best effluent quality.
Send Email Details -
Hot
CS Pure Water Preparation
Ion exchange is a novel water treatment technology developed rapidly in recent 20 years. It can be effectively used in hard water softening, pure water preparation, purification and separation of rare and radioactive elements, extraction and purification of organic compounds, decolorization and purification of food and drugs in electronics, electric power, chemical industry, medicine, lightness, textile, metallurgy, transportation, shipping and national defense industries, Recovery of important chemical raw materials and treatment of three wastes.
Send Email Details -
Gravity Water Purifier
KGL gravity water purifier is a unified water purification equipment with surface water as the water source and integrating reaction, sedimentation and filtration. If it is combined with alum dosing and disinfection, it can become a water purification station (water purification plant) with complete functions. The equipment adopts advanced processes such as folded plate reaction, high-efficiency inclined tube sedimentation and multi-layer filter material filtration. The equipment has reasonable process parameters, compact structure, convenient operation and management, high effluent load rate, good purification effect, stable and reliable equipment performance and operation. It can adapt to river, river, lake, reservoir and other source water. This series of products are widely applicable to the purification of domestic and industrial water in towns, communities, villages and towns, industrial and mining enterprises, schools, stations, docks, buildings and field operations, tourist areas, military camps and so on.
Gravity water purification equipment Field water purification equipment School water purification equipmentSend Email Details -
High Efficiency Precipitator
The unit adopts a new process of two-stage mixed reaction and rapid sedimentation. a. Compact structure, small volume, no mechanical transmission, convenient operation and management. b. High processing efficiency, good effect, stable performance and no noise in operation. c. The medicine is fully utilized, the consumption is saved, and the recurrent cost is low.
High efficiency precipitator High turbidity water purification equipment High turbidity water purifierSend Email Details -
Hot
Drinking Water Defluorination Equipment
a. Advanced technology, compact structure, large adsorption capacity, less land occupation and high water production rate per unit area. b. Simple operation, long operation cycle, stable effluent quality and no sludge discharge. c. The regeneration time is short, the drug consumption and water consumption are small, and there is no secondary pollution. d. It can be used in series and parallel for single or multiple units, and the characteristics of phased construction and combination with water supply system can be used.
Activated alumina water purifier Fluorine containing wastewater purifier Arsenic containing wastewater purifierSend Email Details -
Hot
Gravity Valveless Filter
The main advantage of ZW gravity valveless filter is that it does not need to use large gate valve and operates automatically; The main disadvantage is that the filter material is in a closed pool, which is more difficult to remove the dirt on the surface of the filter layer that is difficult to wash for "sanding". During filtration, the muddy water passes through the inlet water distribution tank, enters the siphon riser from the inlet pipe, and then evenly distributes on the filter material layer after passing through the baffle under the umbrella top cover, and enters the bottom water distribution area through the support layer and small resistance water distribution system. The filtered water rises to the flushing water tank through the connecting channel. When the water level of the water tank reaches the overflow weir at the outlet of the outlet channel, it overflows into the channel and finally flows into the clean water tank.
Send Email Details
